@article { author = {Falahat, Reza and MacBeth, Colin and Shams, Asghar}, title = {A practical 4D seismic attribute to estimate saturation and pressure changes arising from reservoir production and injection}, journal = {Journal of Petroleum Geomechanics}, volume = {1}, number = {2}, pages = {60-73}, year = {2017}, publisher = {Petroleum Geomechanics Association}, issn = {2538-4651}, eissn = {2538-4643}, doi = {10.22107/jpg.2018.87905.1024}, abstract = {One of the main objectives of 4D seismic interpretations is to estimate pressure and saturation change caused by reservoir production and injection. Estimation of these changes would assist to update the simulation and geomechanical models of our hydrocarbon reservoirs. Different techniques have been recently proposed to estimate the pressure and saturation changes using 4D seismic data. Typically, these methods linearly decompose the effect of pressure and saturation changes. For calibration of the proposed equations, laboratory measurements, rock physics relationships or even reservoir scale simulation model and well production data have been employed. Although, they work reasonably well in the given datasets, there is a need for extensive pre-setting steps to calibrate these equations which in turns requires time and cost. In this paper, Rock Physics and Petrophysics principles are utilised in order to develop two independent attributes which can calculate the pressure and saturation changes, separately. Both equations are easy to apply and interpret, and require not more than a few hours for their parameters calibration. Although, these two independent attributes were successfully implemented in one of the North Sea complex oil reservoir, but both attributes are qualitative indication of pressure and saturation changes.}, keywords = {4D seismic,rock physics,Inversion,Pressure Change Attribute,Saturation Change Attribute}, title_fa = {ارائه نشانگرهای کاربردی لرزه‌نگاری چهاربعدی جهت محاسبه تغییرات فشار و اشباع‌شدگی حاصل از برداشت و تزریق مخازن نفت و گاز}, abstract_fa = {تخمین و محاسبه تغییرات فشار و اشباع‌شدگی حاصل از تولید و تزریق مخازن نفت و گاز، یکی از کاربردهای اصلی لرزه‌نگاری چهاربعدی می‌باشد. تخمین این پارامترها در مقیاس مخزن، کمک شایانی به بروز رسانی مدلهای شبیه‌ساز مخازن نفت و گاز و همچنین مدلهای ژئومکانیکی آنها می‌کند. روشهای متعددی در سالهای اخیر با هدف تخمین تغییرات فشار و اشباع‌شدگی با استفاده از داده‌های لرزه‌نگاری چهاربعدی ارائه شده است که معمولا اثر تغییرات فشار و اشباع‌شدگی را به صورت خطی تجزیه می‌کنند. جهت واسنجی (Calibration) معادلات ارائه شده، معمولا داده‌های آزمایشگاهی، روابط تجربی فیزیک‌سنگی و یا داده‌های چاه به همراه مدلهای شبیه‌ساز در مقیاس مخزن مورد استفاده قرار می‌گیرد. اگرچه این روشها جوابهای نسبتا قابل قبولی به همراه داشته‌اند، کاربرد آنها نیاز به تنظیمات و واسنجی‌های نسبتا پیچیده و زیادی دارند که طبیعتا نیاز به زمان و هزینه زیادی خواهند داشت. با استفاده از روابط فیزیک‌سنگی و پتروفیزیکی، در این مقاله دو نشانگر مستقل توسعه و معرفی می‌شوند که به صورت جداگانه تغییرات فشار و اشباع‌شدگی را محاسبه می‌کنند. از نقطه نظر کاربردی، هر دو معادله بسیار ساده بوده و قابل کاربرد در مدت زمان کمتر از یک روز هستند و علاوه بر آن تفاسیر ساده‌ای دارند. اگر چه نشانگرهای پیشنهاد شده توانسته‌اند جوابهای قابل قبولی در مخزن مورد مطالعه در دریای شمال ارائه دهند، هر دوی این نشانگرها ماهیت کیفی جهت نمایش تغییرات فشار و اشباع‌شدگی دارند. بنابراین ادامه این کار تحقیقاتی جهت کمی کردن این نشانگرها پیشنهاد می‌گردد.}, keywords_fa = {لرزه‌نگاری چهاربعدی,فیزیک‌سنگ,وارون‌سازی,نشانگر تغییرات فشار,نشانگر تغییرات اشباع شدگی}, url = {http://www.irpga-journal.ir/article_54707.html}, eprint = {http://www.irpga-journal.ir/article_54707_dc290484c3f75e1808f8919941a44c84.pdf} }