[1] Halliburton Geomechanics, “http”//www.halliburton.com/en- US/ps/consulting/ petroleum- geomechanics. Page? Node- id=hkv12s6j”
[2] Schlumberger (2016) Real-time drilling geomechanics. http://www. slb.com/~/media/Files/dcs/product_sheets/geomechanics/geome chanics_rt_ps.pdf. Checked on 18 Nov 2016.
[3] Aadnoy BS (2003) Introduction to special issue on borehole stability. J Pet Sci Eng 38(3–4):79–82.
[4] Mody FK (2013) Bridging the gap: challenges in deploying leading edge geomechanics technology to reducing well construction costs. In: SPE/IADC Indian drilling technology conference and exhibition. Mumbai, India, 16 October 2006. Society of Petroleum Engineers.
[5] Aslannezhad M, Khaksar manshad A, Jalalifar H (2016) Determination of a safe mud window and analysis of wellbore stability to minimize drilling challenges and non-productive time. J Pet Explor Prod Technol 6:493–503. https://doi.org/10.1007/s1320 2-015-0198-2
[6] Kolawole O, Federer-Kovács G, Szabó I (2018) susceptibility to wellbore instability and sand production in the Pannonian Basin, Hungary. American Rock Mechanics Association, Alexandria.
[7] Wang Y, Watson R, Rostami J et al (2014) Study of borehole stability of Marcellus shale wells in longwall mining areas. J Pet Explor Prod Technol 4:59–71. https://doi.org/10.1007/s1320 2-013-0083-9.
[8] Ashena, R., Elmgerbi, A., Rasouli, V., Ghalambor, Rabiei, M., Bahrami, A., (2020). Severe wellbore instability in a complex lithology formation necessitating casing while drilling and continuous circulation system, Journal of Petroleum Exploration and Production Technology (2020) 10:1511–1532
https://doi.org/10.1007/s13202-020-00834-3.
[9] Yu, Yanxiang, (2020). Synthetic Sonic Log Generation, SPWLA, viewed 20 April 2020.
[11] Bestagini, P., Lipari, V., Tubaro, S., aug, )2017(. A machine learning approach to facies classification using well logs. In: SEG Technical Program Expanded Abstracts 2017. Society of Exploration Geophysicists, pp. 2137–2142. https://doi.org/10.1190/ segam2017-17729805.1.
[12] Ashraf, U., Zhu, P., Yasin, Q., Anees, A., Imraz, M., Mangi, H.N., Shakeel, S., (2019). Classification of reservoir facies using well log and 3D seismic attributes for prospect evaluation and field development: a case study of Sawan gas field, Pakistan. J. Petrol. Sci. Eng. 175, 338–351.
https://doi.org/10.1016/j.petrol.2018.12.060.
[13] Ashraf, U., Zhang, H., Anees, A., Mangi, H.N., Ali, M., Ullah, Z., Zhang, X., (2020a). Application of unconventional seismic attributes and unsupervised machine learning for the identification of fault and fracture network. Appl. Sci. https://doi.org/ 10.3390/app10113864 Jiang, R., (2020). Building a rock physics model for the.
[15] Marco, I., John, F., Fred, J., (2021). Improving facies prediction by combining supervised and unsupervised learning methods: Journal of Petroleum Science and Engineering 200 (2021) 108300
[16] Muhammad Ali, A., Ren Jiang, B., Huolin Ma, A., Heping Pan, A., Khizar Abbas, C., Umar Ashraf, D., (2021). Machine learning - A novel approach of well logs similarity based on synchronization measures to predict shear sonic logs: Journal of Petroleum Science and Engineering 203 (2021) 108602.
[17] Thiago Santi, B., Marcelo Kehl, D., Tiago, J., Girelli, F., Chemale, J., (2020). Evaluation of machine learning methods for lithology classification using geophysical data: Computers and Geosciences 139(2020)104475.
[18] M. Anemangely, A. Ramezanzadeh, H. Amiri, S.A. Hoseinpour, (2019). Machine learning technique for the prediction of shear wave velocity using petrophysical logs J. Petrol. Sci. Eng., 174 (2019), pp. 306-32.
[19] A.Al-Anazi, I.D.Gates, (2010). A support vector machine algorithm to classify lithofacies and model permeability in heterogeneous reservoirs. Engineering Geology. Volume 114, Issues 3–4, 10 August 2010, Pages 267-277.
[20] Scikit Learn, (2020). K Nearest Neighbors Documentation, sklearn, viewed 20 April 2020, <https://scikit- learn.org/stable/modules/generated/sklearn.neighbors.KNeighborsRegressor.html#sklearn.neighbors.KNeigh borsRegressor>
[22] Fjaer E, Holt RM, Raaen AM, Risnes R, Horsrud P (2008) Petroleum related rock mechanics, 2nd edn. Elsevier Science, Amsterdam.
[23] Zoback, M.D., (2007) Reservoir Geomechanics. Cambridge, United Kingdom; Cambridge University Press
[24] Singh R., Kainthola, A, and Singh T.N. (2012). “Estimation of elastic constant of rocks using an ANFIS approach”, Applied Soft Computing, 12, pp. 40–45.
[25] Roy S, Gebert J., Stasiuk G., Romana P., Weidenmann K. A., and Wanner, A. (2011). “Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modeling”, Materials Science and Engineering A, 528, pp. 8226-8235.
[26] Ghalibaf, H., Hafezi Moghaddas, N., Lashkaripoor, G.R., Raoof G., Hossin T., (2022). Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods “JOURNAL OF PETROLEUM GEOMECHANICS (JPG).: (DOI) 10.22107/jpg.2022.329417.1158.
[27] Fjaer E., Holt R.M., Hordrud P., Raaen A.M. and R. Risnes. (2008). “Petroleum related rock Rock Mechanic”, Developments in Petroleum Science, Elsevier.
[28] Barton N (2006) Rock quality, seismic velocity, attenuation and anisotropy. Taylor and Francis, Oxford
[29] Holt RM (2013) Static and dynamic moduli—so equal, and yet so different. Presented at the 47th US rock mechanics symposium held in San Francisco, CA, USA, 23–26 June
[30] Wang Z (2000) Dynamic vs. static properties of reservoir rocks. In: Wang Z, Nur A (eds) Seismic and acoustic velocities in reservoir rocks, vol 3: recent developments. SEG, Tulsa.
[31] Larsen I, Fjaer E, Renlie L (2000) Static and dynamic Poisson’s ratio of weak sandstones. In: ARMA-2000-0077, 4th North American rock mechanics symposium, 31 July–3 August, Seattle, Washington.
[32] Bradford I.D.R., Fuller J., Thompson P.J and Walsgrove T.R.: “Benefits of Assessing Solids Production Risk In A North Sea Reservoir Using Elastoplastic Modelling,” SPE/ISRM 47360, SPE/ISRM Eurock ’98 held in Trondheim, Norway, 8-10 July 1998.
[33] Chang C, Zoback M, Khaksar A (2006) Empirical relations between rock strength and physical properties in sedimentary rocks. J Pet Sci Eng 51(3–4):223–237
[34] Plumb R (1994) Infuence of composition and texture on the failure properties of clastic rocks. In: SPE 28022-MS, Rock mechanics in petroleum engineering, 29–31 August, Delft, Netherlands
[35] Schlumberger (2016) Real-time drilling geomechanics. http://www. slb.com/~/media/Files/dcs/product_sheets/geomechanics/geome chanics_rt_ps.pdf. Checked on 18 Nov 2016.
[36] Dugan B, Flemings PB (1998) Pore pressure prediction from stacking velocities in the Eugene Island 330 Field (Ofshore Lousiana). Gas Research Institute, Chicago, p 23
[37] Zhang J (2011) Pore pressure prediction from well logs: methods, modifcations, and new approaches. Earth Sci Rev 108(1–2):50–63.
[38] Mouchet JP, Mitchell A (1989) Abnormal pressures while drilling: origins, prediction, detection, evaluation. Elf EP-Editions, Editions Technip, Paris.
[39] Mavko G, Mukerji T, Godfrey N (1995) Predicting stress-induced velocity anisotropy in rocks. Geophysics 60:1081–1087. https:// doi.org/10.1190/1.1443836.
[40] Breckels, I. M. and Van Eekelen, H. A. M. (1981). “Relationship between horizontal stress and depth in sedimentary basins: Paper SPE10336, 56th Annual Fall Technical Conference.” Society of Petroleum Engineers of AIME, San Antonio, Texas, October 5–7.
[41] Blanton TL, Olson JE (1997) Stress magnitudes from logs: efects of tectonic strains and temperature. SPE-38719-MS, Presented at SPE annual technical conference and exhibition, 5–8 October, San Antonio, Texas.
[42] Kidambi, T., Kumar, G. S., “Mechanical Earth Modeling for a vertical well drilled in a naturally fractured tight carbonate gas reservoir in the Persian Gulf”, Journal of Petroleum Science and Engineering, Vol. 141, pp. 38-51, 2016.
[43] Zoback M (2010) Reservoir geomechanics. Cambridge University Press, Cambridge
[44] Sinha BK, Vissapragada B, Renlie L, Skomedal E (2006) Horizontal stress magnitude estimation using the three shear moduli—a norwegian sea case study. Soc Petrol Eng. https://doi. org/10.2118/103079-MS
[45] Sayers C, Nagy Z, Vasudev S, Tagbor K, Hooyman P (2009) Determination of in situ stress and rock strength using borehole acoustic data. SEG Technical Program
[46] Kirsch G, (1898) Die Theorie der Elastizitat und die Bedurfnisse der Festigkeitslehre. Zeitschrift des Verlines Deutscher Ingenieure. 42:707.
[47] Goodman RE (1989) Introduction to rock mechanics. Wiley, Hoboken.
[48] Nelson, E.J., (2005). Transverse drilling-induced tensile fractures in the West Tuna area,Gippsland Basin, Australia: implications for the in situ stress regime. 42, pp. 361- 371.
[49] Al-Ajmi, A.M., and Zimmerman, R.W. (2006). “Stability analysis of vertical boreholes using the Mogi–Coulomb failure criterion”. Int. J. Rock Mech. Min. Sci., 43, pp. 1200- 1211.
[50] Guo B, Ghalambor A (2002) Gas volume requirements for underbalanced drilling. Pennwell Corporation, Tulsa. ISBN 0-87814-802-7.
[51] Aadnoy BS, Looyeh R (2010) Petroleum rock mechanics: drilling operations and well design. Gulf Professional Publishing, Elsevier, Amsterdam
[52] Bowes C, Procter R (1997) Drillers stuck pipe handbook, guidelines and drillers handbook credits. Schlumberger, UK
[53] Simangunsong RA, Villatoro JJ, Davis AKM (2006) Wellbore stability assessment for highly inclined wells using limited rockmechanics data. SPE-99644. Presented at the 2006 SPE annual technical conference and exhibition, San Antonio, Texas, USA, 24–27 September
[54] Zhang J, Yu M, Al-Bazali TM, Ong S, Chenevert ME, Sharma MM, Clarc DE (2006) Maintaining the stability of deviated and horizontal wells: efects of mechanical, chemical, and thermal phenomena on well designs. SPE-100202, Presented at the 2006 SPE international oil and gas conference and exhibition, Beijing, China, 5–7 December.