An Analytical Poroelastic Model to Study the LCM Performance during the Wellbore Strengthening

Document Type : Original Article

Authors

1 Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran

2 Associate Professor; Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran

3 Associate Professor; Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

Abstract

One of the most challenging problems during drilling operations is loss circulation, which can result in wasting productive time and operation costs. Different studies and field experiences indicate that wellbore strengthening (WBS) is a practical approach to prevent or treat this problem. Plugging the wellbore fractures with lost circulation materials (LCMs) changes the stress distribution on the wellbore wall and fracture tip, leading to decrease the fluid loss possibility. In this paper, it has been attempted to introduce a poroelastic analytical model to investigate the effective factors on wellbore stresses based on fracture mechanics. The sensitivity analysis on different factors shows that geomechanical parameters (in-situ stress anisotropy), geometry parameters (LCM plug location, fracture length), and poroelastic properties (formation pore pressure and biot coefficient) have a significant effect on WBS. Based on the modeling results, the closer the LCM bridge location to the fracture mouth, the better strengthening can be achieved, and it can be more effective in the isotropic stress conditions, low-pressure formations and for a shorter fracture, due to less stress concentration on the fracture tip.

Keywords

References

Al-Hameedi, AT, Alkinani, HH, Norman, SD, & Flori, RE. (2018). Practical Strategies and Engineered Solutions to Minimize the Impact of Lost Circulation Problem. J Pet Environ Biotechnol, 9(356), 2 .
Alberty, Mark W, & McLean, Michael R. (2004). A physical model for stress cages. Paper presented at the SPE Annual Technical Conference and Exhibition, SPE 90493.
Alsaba, Mortadha, Nygaard, Runar, Saasen, Arild, & Nes, Olav-Magnar. (2016). Experimental investigation of fracture width limitations of granular lost circulation treatments. Journal of Petroleum Exploration and Production Technology, 6(4), 593-603. doi: 10.1007/s13202-015-0225-3.
Benyeogor, Ogochukwu, Awe, Sunday, Amah, Obinna, Ugochukwu, Oseme, Erinle, Adeyemi, Akinfolarin, Ayodele, & Oseme, Ugochukwu. (2016), Wellbore Strengthening in Narrow Margin Drilling, SPE-AFRC-2554559-MS.
Cook, John, Growcock, Fred, Guo, Quan, Hodder, Mike, & van Oort, Eric. (2011). Stabilizing the wellbore to prevent lost circulation. Oilfield Review, 2012(23), 4 .
Feng, Y. (2016). Fracture Analysis for Lost Circulation and Wellbore Strengthening. PhD Dissertation, The University of Texas at Austin .
Feng, Y, Arlanoglu, C, Podnos, E, Becker, E, & Gray, KE. (2015). Finite-element studies of hoop-stress enhancement for wellbore strengthening. SPE Drilling & Completion, 30(01), 38-51 .
Feng, Yongcun, & Gray, KE. (2016). A parametric study for wellbore strengthening. Journal of Natural Gas Science and Engineering, 30, 350-363 .
Feng, Yongcun, & Gray, KE. (2017a). Modeling lost circulation through drilling-induced fractures. SPE Journal .
Feng, Yongcun, & Gray, KE. (2017b). Review of fundamental studies on lost circulation and wellbore strengthening. Journal of Petroleum Science and Engineering .
Feng, Yongcun, & Gray, Kenneth E. (2016). A fracture-mechanics-based model for wellbore strengthening applications. Journal of Natural Gas Science and Engineering, 29, 392-400 .
Fjar, Erling, Holt, Rune M, Raaen, AM, Risnes, Rasmus, & Horsrud, P. (2008). Petroleum related rock mechanics (Vol. 53): Elsevier.
Ghalambor, Ali, Salehi, Saeed, Shahri, Mojtaba P, & Karimi, Moji. (2014). Integrated workflow for lost circulation prediction. Paper presented at the SPE international symposium and exhibition on formation damage control.
Growcock, FB, Kaageson-Loe, N, Friedheim ,J, Sanders, MW, & Bruton, J. (2009). Wellbore stability, stabilization and strengthening. Paper presented at the Offshore Mediterranean Conference and Exhibition, OMC-2009-107.
Guo, Q, Feng, YZ, & Jin, ZH. (2011). Fracture aperture for wellbore strengthening applications. Paper presented at the 45th US Rock Mechanics/Geomechanics Symposium., ARMA 11-378.
Ito, Takatoshi, Zoback, Mark D, & Peska, Pavel. (2001). Utilization of mud weights in excess of the least principal stress to stabilize wellbores: Theory and practical examples. SPE Drilling & Completion, 16(04), 221-229 .
Ivan, C, Bruton, J, & Bloys, B. (2003). How can we best manage lost circulation? Paper presented at the American Association of Drilling Engineeers (AADE) National Technology Conference, Houston, TX, Apr., AADE-03-NTCE-38.
Mehrabian, Amin, Jamison, Dale E, & Teodorescu, Sorin Gabriel. (2015). Geomechanics of lost-circulation events and wellbore-strengthening operations. SPE Journal, 20(06), 1,305-301,316 .
Mostafavi Toroqi, S. V. (2012). Experimental Analysis and Mechanistic Modeling of Wellbore Strengthening. University of Calgary .
Rezagholilou, Ali, Vialle, Stephanie, & Madadi, Mahyar. (2017). Determination of safe mud window considering time-dependent variations of temperature and pore pressure: Analytical and numerical approaches. Journal of Rock Mechanics and Geotechnical Engineering, 2, 1-12 .
Salehi, Saeed. (2012). Numerical simulations of fracture propagation and sealing: Implications for wellbore strengthening: Missouri University of Science and Technology.
Salehi, Saeed, & Nygaard, Runar. (2012). Numerical modeling of induced fracture propagation: A novel approach for lost circulation materials (LCM) design in borehole strengthening applications of deep offshore drilling. Paper presented at the SPE Annual Technical Conference and Exhibition. SPE135155-MS.
Shahri, Mojtaba P. (2015). Quantification of wellbore strengthening mechanisms: comprehensive parametric analysis. Paper presented at the SPE Annual Technical Conference and Exhibition . SPE-174770-MS.
Shahri, Mojtaba P, Oar, Trevor, Safari, Reza ,Karimi, Moji, & Mutlu, Uno. (2014). Advanced geomechanical analysis of wellbore strengthening for depleted reservoir drilling applications. Paper presented at the IADC/SPE Drilling Conference and Exhibition. SPE-167976-MS.
Shahri, Mojtaba P, Oar, Trevor T, Safari, Reza, Karimi, Moji, & Mutlu, Uno. (2015). Advanced semianalytical geomechanical model for wellbore-strengthening applications. SPE Journal, 20(06), 1,276-271,286 .
Shen, Guoyang, & Shen, Xinpu. (2016). Widened Safe Mud Window for Subsalt Well Sections: A Workflow and Case Study. Paper presented at the Offshore Technology Conference. OTC-26917-MS
Shen, Xinpu. (2016). Widened safe mud window for naturally fractured shale formations: a workflow and case study. Paper presented at the IADC/SPE Asia Pacific drilling technology conference. SPE180519-MS.
Sweatman, RE, Kessler, CW, & Hillier, JM. (1997). New solutions to remedy lost circulation, crossflows, and underground blowouts. Paper presented at the SPE/IADC drilling conference. SPE-37671-MS.
Tada, Hiroshi, Paris, Paul C, & Irwin, George R. (1973). The stress analysis of cracks. Handbook, Del Research Corporation .
Van Oort, Eric, Friedheim, James E, Pierce, Toby, & Lee, John. (2011). Avoiding losses in depleted and weak zones by constantly strengthening wellbores. SPE Drilling & Completion, 26(04), 5. 530-19.
Wang, H, Soliman, MY, Towler, BF, & Shan, Z. (2009). Strengthening a wellbore with multiple fractures: further investigation of factors for strengthening a wellbore. Paper presented at the 43rd US Rock Mechanics Symposium & 4th US-Canada Rock Mechanics Symposium. ARMA-09-067.
Wang, Hong, Soliman, Mohamed Y, & Towler, Brian Francis. (2008). Investigation of factors for strengthening a wellbore by propping fractures. Paper presented at the IADC/SPE drilling conference. SPE-112629-MS.
Wang, Hong, Towler, Brian Francis, & Soliman, Mohamed Y. (2007). Fractured wellbore stress ;analysis: sealing cracks to strengthen a wellbore. Paper presented at the SPE/IADC Drilling Conference.
Wang, Ze, & Chen, Yuanhang. (2018). Finite Element Analysis of Thermally Induced Stresses in the NearWellbore Region During Invasion of Mud Into Fractures. Journal of Energy Resources Technology, 140(5), 052909 .
Wang, Ze, Yang, Mingzheng, & Chen, Yuanhang. (2019). Numerical modeling and analysis of induced thermal stress for a non-isothermal wellbore strengthening process. Journal of Petroleum Science and Engineering, 175, 173-183 .
Journal of Petroleum Geomechanics
Volume 3, Issue 4
May 2020
Pages 57-74

Files

Share

How to cite

Statistics