An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening

Document Type : Original Article

Authors

1 Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran

2 Associate Professor; Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran

3 Associate Professor; Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

4 Petroleum Eng. Department, Amirkabir University of Technology, Tehran, Iran

5 Drilling technologies and well completion research, Research Institute of Petroleum Industry

Abstract

Drilling fluid plays an important role during the drilling operation of a well and can lead to a lot of problems or cure different challenges. Loss circulation is one of these challenges, which can increase non-productive time and operation costs, dramatically. The key solution for solving this problem is to increase the pressure-bearing capacity of the formation and to strengthen the wellbore with the help of drilling fluid. The purpose of this study is to design the "Wellbore Strengthening Evaluation" apparatus to simulate the formation fracturing process and investigate the LCM effects on the improvement of mud properties and rock fracture gradient. Therefore, in this paper, the cylindrical concrete cores are used as rock samples and Water-based bentonite drilling mud containing two different types of LCM are considered as drilling fluid. The results of experiments show that the addition of different LCMs to the drilling fluid leads to an increase in the formation breakdown pressure (FBP) and fracture reopening pressure (FRP) to 33 and 72%, respectively. Therefore, before drilling a formation with the possibility of loss circulation, it is an effective practice to add LCM particles in the drilling fluid to increase the fracture pressure of the formation.

Keywords

References

Aadnoy, B. S., Belayneh, M., Arriado, M., & Flateboe, R. (2007). Design of well barriers to combat circulation losses. SPE/IADC Drilling Conference, Proceedings, 1, 422–428.
AlAwad, M. N. J. (2020). A new approach for understanding the mechanism of wellbore strengthening theory. Journal of King Saud University - Engineering Sciences. https://doi.org/10.1016/j.jksues.2020.07.015 .
Alberty, Mark W., Mclean. R. M. (2004). A physical model for stress cages. SPE Annual Technical Conference and Exhibition .
Alsaba, M. T. (2015). Investigation of lost circulation materials impact on fracture gradient. MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY, USA .
Alshubbar, G. D., Aramco, S., & Nygaard, R. (2018). Curing Losses in Vuggy Carbonate Formations Depositional Environment , Textures and Petrophysics Diagenetic Processes. SPE/IADC Middle East Drilling Technology Conference and Exhibition. Society of Petroleum Engineers, 29–31 .
Brandl, A., Bray, W., & Molaei, F. (2011). Curing Lost Circulation Issues and Strengthening Weak Formations with a Sealing Fluid for Improved Zonal Isolation of Wellbores Lab test results. Australian Geothermal Energy Conference 2011, 25–28. https://www.geothermal-energy.org/pdf/IGAstandard/AGEC/2011/GA20032.pdf .
Contreras Puerto, O. (2014). Wellbore Strengthening by Means of Nanoparticle-Based Drilling Fluids., University of Calgary, Canada.
Cook, J., Growcock, F., Guo, Q., Hodder, M., & van Oort, E. (2011). Stabilizing the wellbore to prevent lost circulation. 23(4), 26–35. https://www.researchgate.net/publication/290592459.
Cook, J., Guo, Q., Way, P., Bailey, L., & Friedheim, J. (2016). The role of filtercake in wellbore strengthening. IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers.
DEA 13. (1985). (Phase I) Final Report. Investigation of Lost Circulation Problems and Apparent Fracture Gradient Reduction Encountered in the Field with Oil-Based Drilling Fluids during Large-Scale Laboratory Fracturing Experiments.
DEA 13. (1988). (Phase II) Final Report. Investigation of Lost Circulation Problems with Oil-Base Drilling Fluids.
Devereux, S. (1999). Drilling for Oil & Gas: A Nontechnical Guide. PennWell Corporation.
Donza H, C. O. (2002). Irassar EF. High-strength concrete with different fine aggregate. Cement and Concrete Research, 32(11), 1755–1761 .
Dudley, J., Fehler, D. F., & Zeilinger, S. J. G. P. (2000). Minimizing Lost Circulation Problems with Synthetic Muds. GPRI Project 2000 DC3.
Dupriest, F. E. (2005). Fracture closure stress (FCS) and lost returns practices. SPE/IADC Drilling Conference. Society of Petroleum Engineers.
Fairhurst, C. E., & Hudson, J. A. (1999). Draft ISRM suggested method for the complete stress-strain curve for intact rock in uniaxial compression. International journal of rock mechanics and mining sciences (1997), 36(3), 279-289 .
Feng, Yongcun, and K. E. Gray. (2018). Modeling lost circulation through drilling-induced fractures. Spe Journal, 23(01), 205–223.
Feng, Yongcun, and Kenneth E. Gray. (2016). A fracture-mechanics-based model for wellbore strengthening applications. Journal of Natural Gas Science and Engineering, 29, 392–400 .
Feng, Yongcun. (2016). Fracture Analysis for Lost Circulation and Wellbore Strengthening. The University of Texas at Austin, USA .
Feng, Yongcun, & Gray, K. E. (2017). Review of fundamental studies on lost circulation and wellbore strengthening. Journal of Petroleum Science and Engineering, 152(February), 511–522 .
Feng, Yongcun, Jones, J. F., & Gray, K. E. (2016). A Review on fracture-initiation and -propagation pressures for lost circulation and wellbore strengthening. SPE Drilling and Completion, 31(2), 134–144. https://doi.org/10.2118/181747-PA.
Fjaer, E., Holt, R. M., Horsrud, A .M., Raeen, A. M., and Risnes, R. (2008). Petroleum Related Rock Mechanics (Second). Elsevier publishing .
Fuh, G.F, Morita, N., Boyd, P.A., McGoffin, S. J. (1992). A New Approach to Preventing Lost Circulation While Drilling. SPE Annual Technical Conference and Exhibition, Washington D.C., USA. October 4 – 7 .
Ghalambor, A., Salehi, S., Shahri, M. P., & Karimi, M. (2014). Integrated workflow for lost circulation prediction. SPE International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA,. https://doi.org/doi: https://doi.org/10.2118/168123-MS.
Guo, Q., Cook, J., Way, P., Ji, L., & Friedheim, J. E. (2014). A comprehensive experimental study on wellbore strengthening. IADC/SPE Drilling Conference and Exhibition. Society of Petroleum Engineers.
He, W., Hayatdavoudi, A., Chen, K., Sawant, K., Zhang, Q., & Zhang, C. (2019). Enhancement of Plastering Effect on Strengthening Wellbore by Optimizing Particle Size Distribution of Wellbore Strengthening Materials. Journal of Energy Resources Technology, 141 ( ۱2 ..)
Howard, G. C., & Scott Jr, P. P. (1951). An Analysis and the Control of Lost Circulation. Journal of Petroleum Technology, 3(6), 171–182. https://doi.org/doi: https://doi.org/10.2118/951171-G.
Jeennakorn, M. (2017). The effect of testing conditions on lost circulation materials ’ performance in simulated fractures. MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY, USA .
Kumar, A., Savari, S., Whitfill, D., Jamison, D. (2011). Application of fiber laden pill for controlling lost circulation in natural fractures. AADE National Technical Conference and Exhibition, Houston, Texas, USA. April 12-14 .
Gambhir, L.M., (2013). concrete thecnology: theory and practices (fifth edit). McGraw Hill Education(India) private limited.
Li, J., Qiu, Z., Zhao, X., Zhong, H., Yang, Y., & Huang, W. (2020). Effect of different parameters on sealing performance of lost circulation process with dynamic fracture aperture testing apparatus. Journal of Petroleum Science and Engineering, 193, 107357. https://doi.org/10.1016/j.petrol.2020.107357 .
Liberman, M. (2012). Hydraulic Fracturing Experiments to Investigate Circulation Losses.
MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY, USA .
Liu, C., & Abousleiman, Y. N. (2018). Multiporosity/multipermeability inclined-wellbore solutions with mudcake effects. SPE Journal, 23(5), 1723–1747. https://doi.org/10.2118/191135-pa.
Liu, Y., Ma, T., Chen, P., Wu, B., Zhang, X., & Wu, B. (2020). Effects of permeable plugs on wellbore strengthening. International Journal of Rock Mechanics and Mining Sciences, 132, 104416. https://doi.org/10.1016/j.ijrmms.2020.104416 .
Ma, B., Pu, X., Zhao, Z., Wang, H., & Dong, W. (2019). Laboratory Study on Core Fracturing Simulations for Wellbore Strengthening. Geofluids. https://doi.org/10.1155/2019/7942064.
Mansour, A. K. A. (2017). Experimental Study and Modeling of Smart Loss Circulation Materials; Advantages and Promises [Louisiana State University]. https://digitalcommons.lsu.edu/gradschool_theses/4316
Messenger, J. U. (1981). Lost Circulation. Pennwell publishing Company, Tulsa, Oklahoma.
Mirabbasi, S. M., Ameri, M. J., Biglari, F. R., & Shirzadi, A. (2020). Thermo-poroelastic wellbore strengthening modeling: An analytical approach based on fracture mechanics. Journal of Petroleum Science and Engineering, 195, 107492. https://doi.org/https://doi.org/10.1016/j.petrol.2020.107492
Morita, N., Black, A. D., & Guh, G. F. (1990). Theory of Lost Circulation Pressure. Paper SPE 20409, Proceedings of the 65th Annual Technical Conference and Exhibition of the Society of Petroleum Engineers Held in New Orleans, LA, 23-26 September, September, 20409 .
Morita, Nobuo, and G.-F. F. (2012). Parametric analysis of wellbore-strengthening methods from basic rock mechanics. SPE Drilling & Completion, 27(02), 315–327.
Mostafavi Toroqi, S. V. (2011). Experimental Analysis and Mechanistic Modeling of Wellbore Strengthening. Department of Chemical and Petroleum Engineering, University of Calgary, Canada.
Nasiri, A., Ghaffarkhah, A., Keshavarz Moraveji, M., Gharbanian, A., & Valizadeh, M. (2017). Experimental and field test analysis of different loss control materials for combating lost circulation in bentonite mud. Journal of Natural Gas Science and Engineering, 44, 1–8. https://doi.org/10.1016/j.jngse.2017.04.004 .
Nasirov, S. (2005). Drilling fluid optimization to mitigate lost circulation. University of Stavanger, Norway.
Nayberg, T. M. (1987). Laboratory study of lost circulation materials for use in both oil-based and water-based drilling muds. SPE Drilling Engineering, 2(03), 229–236 .
Paes de Godoi, F. A., Scheid, C. M., Bernardo, L. S., Rosas de Oliveira, B., Borges Filho, M. N., & Calçada, L. A. (2018). Study of the pressure drop and the flow of loss circulation material suspensions in a physical simulator of fractures. Journal of Petroleum Science and Engineering, 168, 48–58 .
Rahimi, R., Alsaba, M., & Nygaard, R. (2016). Analysis of analytical fracture models for wellbore strengthening applications: An experimental approach. Journal of Natural Gas Science and Engineering, 36, 865–874. https://doi.org/10.1016/j.jngse.2016.11.022 .
Razavi, S. O. (2016). Experimental Investigation of the Wellbore Strengthening Phenomenon. The University of Texas at Austin, USA .
Salehi, S., and R. K. (2016). Integrated experimental and analytical wellbore strengthening solutions by mud plastering effects. Journal of Energy Resources Technology, 138 ( ۳ ..)
Salehi, S. (2012). Numerical simulations of fracture propagation and sealing: implications for wellbore strengthening [MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY, USA]. http://laurel.lso.missouri.edu/record=b10719057~S5.
Sanders, Mark W., Steven Young, and J. F. (2008). Development and testing of novel additives for improved wellbore stability and reduced losses. AADE Fluids Conference and Exhibition, Houston, USA.
Savari, Sharath, Kumar, Arunesh, Whitfill, Donald L, Miller, Matthew, Murphy, Robert J, & Jamison, Dale E. (2013). Engineered LCM design yields novel activating material forpotential application in severe lost circulation scenarios. Paper Presented at the North Africa Technical Conference and Exhibition .
Shahri, M. P. (2015). Quantification of wellbore strengthening mechanisms: comprehensive parametric analysis. SPE Annual Technical Conference and Exhibition .
Turner, J. P., Healy, D., Hillis, R. R., & Welch, M. J. (2017). Geomechanics and geology: introduction. Geological Society, London, Special Publications, 458(1), 1-5 .
Van Oort, E., and Vargo, R. F. (2008). Improving formation-strength tests and their interpretation. SPE Drill. Complet., 23(03), 284–294 .
Van Oort, E., Friedheim, J., Pierce, T., and Lee, J. (2011). Avoiding Losses in Depleted and Weak Zones by Constantly Strengthening Wellbores. SPE Drilling & Completion, 26 (4), 519–530.
Wang, H. (2007). Near Wellbore Stress Analysis for Wellbore Strengthening (Issue May). Department of Chemical and Petroleum Engineering, University of Wyoming, USA.
Yang, M., Li, M. C., Wu, Q., Growcock, F. B., & Chen, Y. (2020). Experimental study of the impact of filter cakes on the evaluation of LCMs for improved lost circulation preventive treatments. Journal of Petroleum Science and Engineering, 191, 107152. https://doi.org/10.1016/j.petrol.2020.107152 .
Yang, Y., Yuan, B., & Wang, Y. (2018). Updated methodology for evaluating lost circulation control of cement slurry for double lost channels. Journal of Petroleum Science and Engineering, 171, 16–22. https://doi.org/10.1016/j.petrol.2018.07.033 .
Zhong, R., Miska, S., Yu, M., Meng, M., Ozbayoglu, E., & Takach, N. (2019). Experimental investigation of fracture-based wellbore strengthening using a large-scale true triaxial cell. Journal of Petroleum Science and Engineering, 178, 691–699. https://doi.org/10.1016/j.petrol.2019.03.081 .
Zoback, M. D. (2010). Reservoir Geomechanics. Cambridge University Press .
 
 
 
 
Journal of Petroleum Geomechanics
Volume 4, Issue 2
January 2022
Pages 60-75

Files

Share

How to cite

Statistics