Campolongo F., Kleijnen J., Andres T. (2000) Screening methods in Sensitivity Analysis, in Sensitivity Analysis, Saltelli A., Chan K., Scott M. (eds), John Wiley and Sons Publishers.
De Moegen, H., & Giouse, H. (1989). Long-Term Study of Cushion Gas Replacement by Inert Gas. SPE Annual Technical Conference and Exhibition.
Egermann, P., Schaaf, T., & Bréfort, B. (2010). A Modified Hysteresis Relative Permeability Including a Gas Remobilization Threshold For Better Production Forecasts of Gas Storages. Society of Petrophysicists and Well-Log Analysts.
Fjaer, E., Holt, R.M., Horsrud, P., Raaen, A.M. & Risnes, R. (2008). Petroleum Related Rock Mechanics, second ed. Elsevier Science, Hungary
Goodarzi, S. (2013). Geomechanical aspects of CO2 storage under fracturing and thermal conditions, in PhD Thesis., University of Calgary: Alberta.
Jafari, A., Sadirli, P., Gharibshahi, R., Kazemi Tooseh, E., Samivand, M., Teymouri, A. (2019). A Numerical Investigation into the Effect of Controllable Parameters on the Natural Gas Storage in a Weak Reservoir-type Aquifer. Iranian Journal of Oil & Gas Science and Technology
Hawkes, C. D., McLellan, P.J and Zimmer, U. (2004). Geomechanical Factors Affecting Geological Storage of CO2 in Depleted Oil and Gas Reservoir: Risks and Mechanisms. American Rock Mechanics Association.
Karimnezhad, M., Jalalifar, H., & Kamari, M. (2014). Investigation of caprock integrity for CO2 sequestration in an oil reservoir using a numerical method. Journal of Natural Gas Science and Engineering, 21, 1127–1137.
Katz, D. L, and Robert, L. L. (1990) Natural Gas Engineering: Production and Storage, McGraw-Hill, New York, USA.
Labaune, F., & Knudsen, J. E. (1987). Inert Gas in Tonder Aquifer Storage: A Complete Preliminary Computer Study. SPE Annual Technical Conference and Exhibition, F., & Knudsen, J. E. (1987). Inert Gas in Tonder Aquifer Storage: A Complete Preliminary Computer Study. SPE Annual Technical Conference and Exhibition.
Laille, J. P., Molinard, J. E., & Wents, A. (1988). Inert Gas Injection as Part of the Cushion of the Underground Storage of Saint-Clair-Sur-Epte, France. SPE Gas Technology Symposium.
Martinez, M. J., Newell, P., Bishop, J. E., & Turner, D. Z. (2013). Coupled multiphase flow and geomechanics model for analysis of joint reactivation during CO2 sequestration operations. International Journal of Greenhouse Gas Control, 17, 148–160.
Ostrowski, L. P., & Uelker, B. (2008). Minimizing Risk of Gas Escape in Gas Storage and Sequestration by In-Situ Measurement of Gas Threshold Pressure and Optimized Completion Solutions. Europec/EAGE Conference and Exhibition.
Persoff, P., Pruess, K., Benson, S. M., Wu, Y. S., Radke, C. J., Witherspoon, P. A., & Shikari, Y. A. (1990). Aqueous Foams for Control of Gas Migration and Water Coning in Aquifer Gas Storage. Energy Sources, 12(4), 479–497.
Rohmer, J., & Seyedi, D. M. (2010). Coupled Large Scale Hydromechanical Modelling for Caprock Failure Risk Assessment of CO2 Storage in Deep Saline Aquifers. Oil & Gas Science and Technology – Revue de l’Institut Français Du Pétrole, 65(3), 503–517.
Rudnicki, J. W. (1986). Fluid mass sources and point forces in linear elastic diffusive solids. Mechanics of Materials, 5(4), 383–393
Shi, J.-Q., & Durucan, S. (2009). A coupled reservoir-geomechanical simulation study of CO2 storage in a nearly depleted natural gas reservoir. Energy Procedia, 1(1), 3039–3046.
Shukla, R., Ranjith, P. G., Choi, S. K., & Haque, A. (2011). Study of Caprock Integrity in Geosequestration of Carbon Dioxide. International Journal of Geomechanics, 11(4), 294–301.
Smith, D. H., & Jikich, S. A. (1993). Foams and Surfactants for Improved Underground Storage of Natural Gas by Blockage of Water Coning. Society of Petroleum Engineers.
Sonier, F., Lehuen, P., & Nabil, R. (1993). Full-Field Gas Storage Simulation Using a Control-Volume Finite-Element Model. Society of Petroleum Engineers.
Teatini, P., Castelletto, N., & Gambolati, G. (2014). 3D geomechanical modeling for CO2 geological storage in faulted formations. A case study in an offshore northern Adriatic reservoir, Italy. International Journal of Greenhouse Gas Control, 22, 63–76
Teletzke, G. F., & Lu, P. (2013). Guidelines for Reservoir Modeling of Geologic CO2 Storage. Energy Procedia, 37, 3936–3944.
Tillner, E., Shi, J.-Q., Bacci, G., Nielsen, C. M., Frykman, P., Dalhoff, F., & Kempka, T. (2014). Coupled Dynamic Flow and Geomechanical Simulations for an Integrated Assessment of CO2 Storage Impacts in a Saline Aquifer. Energy Procedia, 63, 2879–2893.
Tooseh, K. E., Jafari, A., & Teymouri, A. (2018). Gas–water–rock interactions and factors affecting gas storage capacity during natural gas storage in a low permeability aquifer. Petroleum Exploration and Development, 45(6), 1123–1128.
Vidal-Gilbert, S., Nauroy, J.-F., & Brosse, E. (2009). 3D geomechanical modelling for CO2 geologic storage in the Dogger carbonates of the Paris Basin. International Journal of Greenhouse Gas Control, 3(3), 288–299.
Vilarrasa, V., Olivella, S., & Carrera, J. (2011). Geomechanical stability of the caprock during CO2 sequestration in deep saline aquifers. Energy Procedia, 4, 5306–5313.
Weaver, J. D., & Morgan, J. A. (1988). Furan Resin Process Replaces Workovers in Gas Storage Reservoirs. SPE Gas Technology Symposium.
Zaitoun, A., Tabary, R., Rousseau, D., Pichery, T. R., Nouyoux, S., Mallo, P., & Braun, O. (2007). Using Microgels to Shut Off Water in a Gas Storage Well. International Symposium on Oilfield Chemistry.