[1] Bear J. (1972), Dynamics of Fluids in Porous Media, American Elsevier Publishing Company, Dover, New York.
[2] Geertsma, J. (1974), Estimating the Coefficient of Inertial Resistance in Fluid Flow Through Porous Media, J Geophys Res-Sol Ea, 14, 445-450.
[3] Forchheimer, P. (1901), Water movement through soil, Zeitschrift des Vereines Deutscher Ingenieure, 45, 1782-1788.
[4] Dake, L.P. (1998), Fundamentals of Reservoir Engineering, 17th edn. Elsevier Science, The Hague, The Netherlands.
[5] Settari, A., Bale, A., Bachman, RC., Floisand, V. (2002), General Correlation for the Effect of Non-Darcy Flow on Productivity of Fractured Wells, Paper presented at the SPE Gas Technology Symposium, Calgary, Canada.
[6] Fetkovich M.J. (1973), The Isochronal Testing of Oil Wells, Paper presented at the Fall Meeting of the Society of Petroleum Engineers of AIME, 30 Las Vegas, Nevada.
[7] Nguyen, T.V. (1986), Experimental Study of Non-Darcy Flow Through Perforations, Paper presented at the SPE Annual Technical Conference and Exhibition, New Orleans.
[8] Al-Otaibi A., Wu Y-S. (2011), An Alternative Approach to Modeling Non-Darcy Flow for Pressure Transient Analysis in Porous and Fractured Reservoirs, SPE/DGS Saudi Arabia Section Technical Symposium and Exhibition, Al-Khobar, Saudi Arabia.
[9] Li, D., Ionescu, C-L., Ehighebolo, I.T., Jr, B.H., Zhazbayeva, A., Yergaliyeva, B., and Francia, L. (2022 November), Modeling and Simulation of Non-Darcy or Turbulent Flow for Oil Wells, Paper presented at the SPE Annual Caspian Technical Conference, Nur-Sultan, Kazakhstan.
[10] Morita, N., Whitfill, D.L., Massie, I., Knudsen, T.W. (1989), Realistic Sand-Production Prediction: Numerical Approach, SPE Production Engineering Journal, 4, 15–24.
[11] Vardoulakis, I., Stavropoulou, M., Papanastasiou, P. (1996), Hydro-mechanical aspects of the sand production problem Transport Porous, Med 22, 225-244.
[12] Skjaerstein, A., Stavropoulou, M., Vardoulakis. I, Tronvoll. J. (1997), Hydrodynamic erosion; A potential mechanism of sand production in weak sandstones, Int J Rock Mech Min 34, 292.e1-292.e2.
[13] Wang, H., Gala., D.P, Mukul M.Sh. (2019), Effect of Fluid Type and Multiphase Flow on Sand Production in Oil and Gas Wells, SPE J. 24, 733–743.
[14] Sun, D., Li, B., Gladkikh, M., Satti, R., Evans, R. (2013), Comparison of Skin Factors for Perforated Completions Calculated with Computational-Fluid-Dynamics Software and the Karakas-Tariq Semianalytical Model, SPE Drill Completion, 28, 21-33.
[15] Sadrnejad, S.A, Ghasemzadeh, H., Khodaei Ardabili, A.A. (2018), A Finite Element Model for Simulating Flow around a Well with Helically Symmetric Perforations, Journal of Engineering Geology, 12, 159-188.
[16] Chan A.H.C., Pastor M., Schrefler B.A., Shiomi T., Zienkiewicz O.C. (2022), Computational Geomechanics Theory and Applications, 2nd eddition, John Wiley & Sons Ltd, Hoboken, USA.
[17] Aziz K., Settari A. (1979), Petroleum reservoir simulation, Applied Science Publishers, Great Britain.
[18] Firoozabadi A, Katz D.L. (1979), An Analysis of High-Velocity Gas Flow Through Porous Media, J Petrol Technol, 211-216.
[19] Potts D.M., Zdravković L. (1999), Finite Element Analysis in Geotechnical Engineering: Theory, Thomas Telford, London, England.
[20] Menetrey Ph., Willam K. J. (1995), Triaxial Failure Criterion for Concrete and its Generalization, ACI Structural Journal, 92, 311–318.
[21] Eshiet K., Sheng Y. (2013), Influence of rock failure behaviour on predictions in sand production problems, Environ Earth Sci, 70, 1339-1365.
[22] Gravanis, E., Sarris E., Papanastasiou P. (2015), Hydro-mechanical erosion models for sand production, Int J Numer Anal Met, 39, 2017-2036.
[23] Papamichos, E. (2004), Failure in rocks: Hydro-mechanical coupling for erosion Revue Française de Génie Civil, 8, 709-734.
[24] Karakas, M., Tariq, S.M. (1991), Semianalytical Productivity Models for Perforated Completions, SPE Production Engineering, 6, 73-82.
[25] Fattahpour, V., Moosavi, M., and Mehranpour, M. (2012), An experimental investigation on the effect of rock strength and perforation size on sand production, J Petrol Sci Eng, 86–87, 172-189
[26] Papamichos, E., Liolios, P., van den Hoek, P.J., (2004), Breakout Stability Experiments and Analysis. Paper presented at the Gulf Rocks 2004, the 6th North America Rock Mechanics Symposium (NARMS), Houston, Texas.