[1] Zoback M. D., and Kohli, A. H., (2019). Unconventional Reservoir Geomechanics: Shale Gas, Tight Oil and Induced Seismicity. Cambridge.
[2] Roshan, H., H. Masoumi, and P.C. Hagan, (2016), On size-dependent uniaxial compressive strength of sedimentary rocks in reservoir geomechanics. In 50th US Rock Mechanics/ Geomechanics Symposium. American Rock Mechanics Association.
[3] Borges, A. F. (2017), Analysis of wave velocity anisotropy of rocks using ellipse fitting, International Journal of Rock Mechanics and Mining Sciences, 96, 23-33.
[4] Fereidooni, D. (2018). Assessing the effects of mineral content and porosity on ultrasonic wave velocity. Geomechanics and Engineering, 14(4), 399-406.
[5] Anemangelya M., A Ramezanzadeh, H. Amiri, S. A. Hoseinpour, (2019), Machine learning technique for the prediction of shear wave velocity using petrophysical logs, Journal of Petroleum Science and Engineering, 174, 306-327.
[6] Mohammad Reza Asef, (2015) Wave velocity in rock, a key parameter to solve problems in petroleum geomechanics. Keynote speaker at the First National Conference on Petroleum Geomechanics, Tehran, 12-13 May.
[7] Fjaer, E., Holt, R. M., Horsrud, P., & Raaen, A. M. (2008). Petroleum related rock mechanics. Elsevier.
[8] Liu K., M. Ostadhassan, L. Sun, J. Zou, Y. Yuan, T. Gentzis, Y. Zhang, H. Carvajal-Ortiz, R. Rezaee, (2019), A comprehensive pore structure study of the Bakken Shale with SANS, N2 adsorption and mercury intrusion, Fuel, 245, 274-285.
[9] Weger R. J., G. P. Eberli, G. T. Baechle, J. L. Massaferro, and Y. F. Sun, (2009) Quantification of pore structure and its effect on sonic velocity and permeability in carbonates. AAPG Bulletin, 93, 10, 1297-1317.
[10] Holt, R. M., Fjær, E., Rzayev1, E., (2004), P- and S-wave velocities in shales: experiments and a model, ARMA/NARMS 04-543.
[11] Yu C., S. Ji, Q. Li, (2016), Effects of porosity on seismic velocities, elastic moduli and Poisson’s ratios of solid materials and rocks. Journal of Rock Mechanics and Geotechnical Engineering, 8, 1, 35-49.
[12] Asef, M. R., M. Farrokhrouz, (2017), A semi-empirical relation between static and dynamic elastic modulus, Journal of Petroleum Science and Engineering, 157, 359-363.
[13] Shiyu, X., & White, R. E. (1995). A new velocity model for clay-sand mixtures. In International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts (Vol. 7, No. 32, p. 333A).
[14] Dewhurst D. N., J. Sarout, C. D., Piane, A. F. Siggins, and M. D. Raven, (2015), Empirical strength prediction for preserved shales. Marine and Petroleum Geology 67, 512-525.
[15] Han D., (1986), Effects of porosity and clay content on acoustic properties of sandstones and unconsolidated sediments. PhD Thesis. Stanford, USA: Stanford University.
[16] Jizba, D. L. (1991), Mechanical and acoustical properties of sandstones and shales. PhD thesis. Stanford University.
[17] Marion, D., and D. Jizba, (1992), Acoustic properties and their dependence on porosity, mineralogy and saturation: applications to field-scale measurements. Proc. 3rd Core Analysis Symposium, Paris.
[18] Dewhurst, D. N., M. D. Raven, P. van Ruth, P. R. Tingate and A. F. Siggins, (2002), Acoustic properties of Muderong shale. The APPEA Journal 42, 1, 241-257. Doi: 10.1071/AJ01014.
[19] Yang, M. S., & Ko, C. H. (1996). On a class of fuzzy c-numbers clustering procedures for fuzzy data. Fuzzy sets and systems, 84(1), 49-60.
[20] Asadollahi, M, Akbari, M. G. (2017) Fuzzy Semi-Parametric Partially Cluster-Wise Regression Analysis. Journal of Advanced mathematical modeling. 7 (1), 37-58.