[1] Plumb, R.A., 1994, Influence of composition and texture on the failure properties of clastic rocks, Rock Mechanics in Petroleum Engineering (EUROCK '94), 29-31 August 1994, Delft, Netherlands, SPE/ISRM 28022-MS
[2] Herwanger, J.H., and Koutsabeloulis, N., 2011, Seismic Geomechanics: How to build and calibrate geomechanical models using 3D and 4D seismic data, EAGE publications, ISBN number 978-90-73834-10-1
[3] Mohamed, F.R., Rasmussen, A., Wendt, A.S., and Murineddu, A., 2008, High resolution 3D Mechanical Earth Model using seismic neural net modeling - Integrating geological, petrophysical and geophysical data, 70th EAGE Conference and Exhibition, Rome, Italy, 9-12 June, P348
[4] Thiercelin, M.J., and Plumb, R.A., 1994, Core-based prediction of lithologic stress contrasts in East Texas formations, SPE Formation Evaluation, 251-258, SPE 21847
[5] Blanton, T.L., and Olson, J.E., 1999, Stress magnitudes from logs: Effects of tectonic strains and temperature, SPE Reservoir Eval. & Eng., 2 (1), 62-68
[6] Zoback, M.D., 2007, Reservoir Geomechanics, Cambridge University Press, Cambridge
[7] Herwanger, J.V., Bottrill, A., and Popov, P., 2016, One 4D geomechanical model and its many applications, 78th EAGE Conference and Exhibition, Vienna, 31. May 2016, DOI: 10.3997/2214-4609.201601368
[8] Wiprut, D., and Zoback, M. [2000] Fault reactivation and fluid flow along a previously dormant normal fault in the North Sea. Geology, 28, 595-598
[9] Byerlee, J. [1978] Friction of rocks, Pageoph, 116(4-5), 615-626
[10] Mildren, S.D., Hillis, R.R., and Kaldi, J. [2002] Calibrating predictions of fault seal reactivation in the Timor Sea. APPEA Journal, 42, 187-202